1. Gladstein, A., Aramanda, S. K., Shi, L., Landini, J., Goettsch, J., Reese, C., Sahu, B., Xiao, X., Hunter, A., Thornton, K., Shahani, A. J., Taub, A. I. (2024) Direct evidence of the formation mechanisms of TiC nanoparticles and Al3Ti intermetallics during synthesis of an Al/TiC metal matrix nanocomposite. doi: 10.1016/j.actamat.2024.120189
  2. Li, Anita, Balogh, Michael P, Thompson, Nathan, Osad, William, Galant, Andrew, Millerman, Alex, Wang, Chuanlong, Taub, Alan. (2024). Magnetic Force Dilatometry of Silicon-NMC622 Lithium-Ion Coin Cells: The Effects of Binder, Capacity Ratio, and Electrolyte Selection. Journal of The Electrochemical Society, 171(3). doi: 10.1149/1945-7111/ad30db
  3. Li, A., Hempel, J. L., Balogh, M. P., Cheng, Y. T., & Taub, A. I. (2023). Effect of Binder Content on Silicon Microparticle Anodes for Lithium-Ion Batteries. Journal of the Electrochemical Society, 170(1). doi:10.1149/1945-7111/acb388
  4. Singhal, A., Banu, M., & Taub, A. (2023). Improving the process of stem breaking for damage reduction in extracted natural fibers. Journal of Manufacturing Processes, 86, 143-151. doi:10.1016/j.jmapro.2022.12.037
  5. Pan, S., Yuan, J., Moodispaw, M. P., Linsley, C., Liu, J., Luo, A. A., . . . Li, X. (2023). Corrosion performance of nano-treated aluminum alloy A206 with TiC nanoparticles. Materials and Corrosion, 74(3), 419-429. doi:10.1002/maco.202213503
  6. Liu, F., Dong, P., Khan, A. S., Zhang, Y., Cheng, R., Taub, A., & Ma, Z. (2023). 3D printing of fine-grained aluminum alloys through extrusion-based additive manufacturing: Microstructure and property characterization. Journal of Materials Science and Technology, 139, 126-136. doi:10.1016/j.jmst.2022.08.017
  7. Zheng, T., Pan, S., Liu, J., Moodispaw, M., Luo, A. A., Taub, A. I., & Li, X. (2023). Study on nano-treating of Al-Mg-Si-Cu alloys with TiC nanoparticles. Journal of Alloys and Compounds, 947. doi:10.1016/j.jallcom.2023.169405
  8. Berman, J., Langhorst, A., Taub, A. (2023). Enhancement of Natural Flax Fibers’ Mechanical Properties via Supercritical Fluid Treatment. Deep Blue: https://dx.doi.org/10.7302/7660
  9. Cheng, R., Rose, S., & Taub, A. (2023). Acoustic softening investigation of the volume effect and introduction of amplitude strain parameter. Materials Science and Engineering: A, 881. doi:10.1016/j.msea.2023.145437
  10. Liu, F.C., Dong, P., Khan, A.S., Sun, K., Lu, W., Taub, A., Allison, J.E. (2022). “Amorphous Interfacial Microstructure and High Bonding Strength in Al-Fe Bimetallic Components Enabled by a Large-Area Solid-State Additive Manufacturing Technique.” Journal of Materials Processing Technology, vol. 308, Amsterdam: Elsevier B.V, pp. 117721-, doi:10.1016/j.jmatprotec.2022.117721.
  11. Cheng, R., Banu, M., Ni, J.,Taub, A., Bansal, A.(2022). “Prediction of Forming Forces for Incremental Micro-Forming Using Finite Element Analysis.” Key Engineering Materials, vol. 926, Trans Tech Publications Ltd, 2022, pp. 815–21, doi:10.4028/p-n18b9s.
  12. Singhal, A., Jin, J., Banu, M., & Taub, A. (2023). Effect of enzyme retting conditions on bast bundle differentiation and mechanical properties of flax technical fibers. Industrial Crops and Products, 205. doi:10.1016/j.indcrop.2023.117478
  13. Liu, Fengchao ; Dong, Pingsha ; Khan, Abdul Sayeed ; Zhang, Yuning ; Cheng, Randy ; Taub, Alan ; Ma, Zongyi. (2023). “3D Printing of Fine-Grained Aluminum Alloys through Extrusion-Based Additive Manufacturing: Microstructure and Property Characterization.” Journal of Materials Science & Technology, vol. 139, Elsevier Ltd, pp. 126–36, doi:10.1016/j.jmst.2022.08.017.
  14. Pan, Shuaihang ; Yuan, Jie ; Jin, Kaiyuan ; Murali, Narayanan ; Gladstein, Aaron ; Zeng, Yuxin ; Taub, Alan ; Li, Xiaochun. (2022). “Influence of Mg on Reaction and Properties of Al–Si/TiC Nanocomposites.” Materials Science & Engineering. A, Structural Materials : Properties, Microstructure and Processing, vol. 840, Lausanne: Elsevier B.V, pp. 142992-, doi:10.1016/j.msea.2022.142992.
  15. Zhang, D., He, Y., Wang, R. et al. Kinetics of single-walled carbon nanotube migration in epoxy resin under DC electric field. Appl. Phys. A 128, 10 (2022). https://doi.org/10.1007/s00339-021-05170-9
  16. Cheng, R., Bansal, A., Kang, J., Liu, X., Taub, A.I. “The Effect of Ultrasonic Vibration on Material Movement in Incremental Sheet Forming,” Forming the Future 2021, pp. 383–394. https://doi.org/10.1007/978-3-030-75381-8_32
  17. Reese, C., Gladstein, A., Shevchenko, P., Xiao, X., Shahani, A., Taub, A. Real-time visualization of particle evolution during reactive flux-assisted processing of aluminum melts, Scripta Materialia, Volume 201, 2021. https://doi.org/10.1016/j.scriptamat.2021.113978.
  18. Zhang, D., Saukas, C., He, Y. et al. Temperature dependence of single-walled carbon nanotube migration in epoxy resin under DC electric field. J Mater Sci 55, 16220–16233 (2020). https://doi.org/10.1007/s10853-020-05150-z
  19. F.C. Liu, P. Dong, J. Zhang, W. Lu, A. Taub, K. Sun, Alloy amorphization through nanoscale shear localization at Al-Fe interface. Materials Today Physics, Volume 15, 2020. https://doi.org/10.1016/j.mtphys.2020.100252.
  20. Reese C, Gladstein A, Fedors J, De Andrade V, Mishra B, Shahani A, Taub A. In situ Al-TiC composites fabricated by self-propagating high-temperature reaction: insights on reaction pathways and their microstructural signatures. Metall. Mater. Trans. A. 2020; 51:3587-3600. DOI: 10.1007/s11661-020-05786-1  
  21. Lewis, Geoffrey, Buchanan, Cailin, Krutarth, Jhaveri, Sullivan, John, Kelly, Jarod, Das, Sujit, Taub, Alan, Keoleian, Gregory, “Green Principles for Vehicle Lightweighting”, Environ. Sci. Technol., 2019, 53 (8), pp 4063–4077.
  22. Robinson, Arthur L, Taub, Alan I, Keoleian, Gregory A., (2019), Fuel efficiency drives the auto industry to reduce vehicle weight, MRS Bulletin Vol. 44, Issue 12, pages 920 – 923.
  23. Bregman, A., Michielssen, E., Taub, A. Comparison of Experimental and Modeled EMI Shielding Properties of Periodic Porous xGNP/PLA Composites, Polymers. 2019;11(8):1233 DOI 10.3390/polym11081233
  24. A. I. Taub, et. al., “Materials for Automotive Lightweighting” Annual Review of Materials Research 49 (1) 327-359 (2019).
  25. Randy Cheng, Nicholas Wiley, Matt Short, Xun Liu, Alan Taub. (2019). Applying ultrasonic vibration during single-point and two-point incremental sheet forming.  Procedia Manufacturing. 34 (C) 186 to 192. doi:10.1016/j.promfg.2019.06.137
  26. J. Shin, A. Bansal, M. Nath, M. Banu and A. Taub, Prediction of Negative Bulge in Two Point Incremental Forming (TPIF) of an Asymmetric Heart Shape Part, International Conference and workshop on Numerical Simulation of 3D sheet Metal forming Process- NUMISHEET 2018.
  27. Bregman, A., Taub, A & Michielssen E. Computational design of composite EMI shields through the control of pore morphology.  MRS Communications, 8 (3) 2018, 1153-1157.
  28. Taub, Alan I., Babu, Sudarsanam S., “Opportunities and Challenges for Introducing New Lightweight Metals in Transportation”, International Journal of Powder Metallurgy, 54(2018) pp.27-33.
  29. Daehn, Glenn S., Taub, Alan I., “Metamorphic Manufacturing: The Third Wave in Digital Manufacturing”, Manufacturing Letters, 15B(2018):86-88. doi-org.proxy.lib.umich.edu/10.1016/j.mfglet.2018.02.014
  30. Chapkin, Wesley A., Wenderott, J.K, Taub, Alan I., “Length dependence of electrostatically induced carbon nanotube alignment”, Carbon, 131(2018) 275-282.
  31. Salem, Erika, Shin, Jaekwang, Nath, Maya, Banu, Miheala, Taub, Alan I., 2016. “Investigation of Thickness Variation in Single Point Incremental Forming”, Procedia Manuf.: 5(2016) pp. 828–837. doi:10.1016/j.promfg.2016.08.068
  32. Chapkin, Wesley A., McNerny, Daniel Q., Aldridge, Michael F., He, Yipeng, Wang, Weimin, Kieffer, John, Taub, Alan I., “Real-time assessment of carbon nanotube alignment in a polymer matrix under an applied electric field via polarized Raman spectroscopy”, Polymer Testing, December 2016, 56, pp.29-35.
  33. Taub, Alan I., Luo, Alan, “Developing Advanced Lightweight Materials and Processes – Applying Materials Science to Automotive Engineering”, MRS Bulletin, December 2015, 40(12):1045-1054.
  34. Taub, Alan I., Krajewski, Paul E., Luo, Alan A., Owens, John N., “Yesterday, today and tomorrow: The evolution of technology for materials processing over the last 50 years: The automotive example,” Journal of Metals, February 2007, 59(2): 48-57.
  35. Briant, C.L., Taub, A.I., Hall, E.L., “Structure and fracture mode of rapidly solidified Pt3Ga,” Journal of Materials Research, December 1990, 5(12): 2841-2848.
  36. Taub, A.I., Briant, C.L., “Improved ductility of Ni3Si by microalloying with boron or carbon,” Metallurgical transactions. A, Physical metallurgy and materials science, October 1989, 20(10): 2025-2032.
  37. Fleischer, Robert L., Taub, Alan I., “Selecting high-temperature structural intermetallic compounds: the materials science approach,” Journal of Metals, September 1989, 41(9): 8-11.
  38. Taub, A.I., Fleischer, R.L., “Intermetallic compounds for high-temperature structural use,” Science, February 1989, 243(4): 616, 6p.
  39. Briant, C.L., Taub, A.I., “Grain boundary segregation of boron and sulfur and its effect on ductility in rapidly solidified Ni-base L12 compounds,” Acta Metallurgica, October 1988, 36(10); 2761-2770.
  40. Taub, A.I., Frischmann, P.G., “Stress-assisted laser cutting of amorphous alloys,” Materials Science and Engineering, February 1988, 9(8): 403-406.
  41. Chang, K.-M., Huang, S.C., Taub, A.I., Chang, G.-M., Morris Jr., J.W., “Cryogenic Properties of A P/M Ni3al-B Alloy,” Metallurgical transactions. A, Physical metallurgy and materials science, October 1987,18(10): 1819-1820.
  42. Taub A.I., Briant C.L., “Effects of Microalloying On Ductility in Ni-Base L12 Intermetallics,” Journal of Metals, October 1987, 39(10): A50.
  43. Taub, A.I., Briant, C.L., “Composition dependence of ductility in boron-doped, nickel-base L12 alloys,” Acta Metallurgica, July 1987, 35(7): 1597-1603.
  44. Taub, A.I., Chang, K.M., Liu, C.T., « Effects of Testing Environment on The Elevated Temperature Ductility of Boron-Doped Ni3al,” Scripta Metallurgica, November 1986, 20(11): 1613-1618.
  45. Huang, S.C., Briant, C.L., Chang, K.M., Taub, A.I., Hall, E.L., “Carbon Effects in Rapidly Solidified Ni3al,” Journal of Materials Research, January 1986, 1(1): 60-67.
  46. Taub, A.I., Briant, C.L., Huang, S.C., Chang, K.M., Jackson, M.R., “Ductility in Boron-Doped, Nickel-Base L12 Alloys Processed by Rapid Solidification,” Scripta Metallurgica, January 1986, 20(1): 129-134.
  47. Taub, A.I., Palmer, C.P., Chang, K.M., Huang, S.C., “Measuring the Mechanical-Properties of Rapidly Solidified Alloys Using Melt Spun Ribbon,” Journal of Metals, December 1984, 36(12): 27.   
  48. Chang K.M., Huang, S.C., Taub, A.I., “Mechanical-Behavior Of P/M Ni3al-B Alloys,” Journal of Metals, December 1984, 36(12) 80.
  49. Huang, S.C., Taub, A.I., Chang, K.M., « Boron extended solubility and strengthening potency in rapidly solidified Ni3Al,” Acta Metallurgica, October 1984, 32(10): 1703-1707.
  50. Taub, A.I., “New Method for Stress Relieving Amorphous Alloys to Improve Magnetic Properties,” IEEE Transactions on Magnetics, July 1984, 20(4): 564-570.
  51. Taub, A.I., Huang, S.C., Chang, K.M., “Improved Strength and Ductility of Ni3al By Boron Modification and Rapid Solidification,” Metallurgical transactions. A, Physical metallurgy and materials science, February 1984, 15(2): 399-402.
  52. Taub, A.I., Walter, J.L., “Scaling the Kinetics of Flow and Relaxation in Amorphous Alloys,” Materials Science and Engineering, February 1984, 62(2): 249-260.
  53. Taub, A.I., Walter, J.L., “Scaling the Composition Dependence of Atomic Transport in Amorphous Alloys,” Journal of Non-Crystalline Solids, Jan 1984, 61-62(2): 811-816.
  54. Taub, A.I., Jackson, M.R., Huang, S.C., “Mechanical-Properties of Rapidly Solidified Nickel-Base Super-Alloys,” Journal of Metals, August 1983, 35(8): A71    
  55. Huang, SC., Chang, K.M., Taub, A.I., “Rapidly Solidified Ni3al Containing Boron,” Journal of Metals, August 1983, 35(8): A19-A20.     
  56. Taub, A.I., “Measurement of the microscopic volume strain element in amorphous alloys,” Scripta Metallurgica, Jul 1983, 17(7): 873-878.
  57. Taub, A.I., “Effect of The Heating Rate Used During Stress Relief Annealing on The Magnetic Properties of Amorphous Alloys,” Journal of Applied Physics, March 1983, 55(6): 1775-1777.
  58. Taub, A.I., “Threshold Stresses in Amorphous Alloys – 1. Flow,” Acta Metallurgica, December 1982, 30(12): 2117-2127.
  59. Taub, A.I., “Threshold Stresses in Amorphous Alloys – 2. Structural Relaxation,” Acta Metallurgica, December 1982, 30(12): 2129-2133.
  60. Taub, A.I., Frischmann, P.G., “Effect of A Magnetic Field on Flow of Amorphous Alloys,” Scripta Metallurgica, November 1982, 16(11): 1267-1268.
  61. Taub, A.I., Luborsky, F.E., “Kinetics of Stress Relaxation and The Effect of Pre-Annealing Amorphous Alloys,” Materials Science and Engineering, November 1982, 56(2): 157-166.
  62. Taub, A.I., Luborsky, F.E., “Creep, Stress Relaxation And Structural Change Of Amorphous Alloys,”Acta Metallurgica, December 1981, 29(12): 1939-1948.
  63. Taub A.I., Spaepen, F., “Ideal Elastic, Anelastic And Viscoelastic Deformation of a Metallic Glass,” Journal of Materials Science, November 1981, 16(11): 3087-3092.
  64. Taub A.I., Spaepen, F., “Kinetics of Structural Relaxation of a Metallic Glass,” Acta Metallurgica, December 1980, 28(12): 1781-1788.
  65. Taub A.I., Spaepen, F., “Homogeneous Flow of Amorphous Pd77. 5cu6si16. 5,” Scripta Metallurgica, November 1980, 14(11): 1197-1199.
  66. Taub A.I., “Creep and Relaxation of Metallic Glasses,” Journal of Metals, August 1980, 32(8): 37.   
  67. Taub A.I., “Stress-Strain Rate Dependence of Homogeneous Flow in Metallic Glasses,” Acta Metallurgica, May 1980, 28(5): 633-637.
  68. Taub A.I., Spaepen, F., “Enhancement of structural relaxation in amorphous PdSi following stress reduction,” Scripta Metallurgica, September 1979, 13(9): 883-886.
  69. Taub A.I., Spaepen, F., “Isoconfigurational flow of amorphous Pd82Si18,” Scripta Metallurgica, Mar 1979, 13(3): 195-198.

Refereed conference or symposium proceedings papers

  1. Anurakparadorn, K., Taub, A., & Michielssen, E. (2023). Design and Optimization of the Porous Metamaterial EM Absorbers in X-band. In 2023 IEEE Symposium on Electromagnetic Compatibility and Signal/Power Integrity, EMC+SIPI 2023 (pp. 218). doi:10.1109/EMCSIPI50001.2023.10241688
  2. Langhorst, A., Rieland, J., Banu, M., Love, B., & Taub, A. (2023). Supercritical Fluid Treatments of Flax Fibers for Improved Mechanical Properties. In Proceedings of the American Society for Composites – 38th Technical Conference, ASC 2023(pp. 1545-1555).
  3. Anurakparadorn, K., & Taub, A. (2023). A Comparative Study of the Effect of Compounding Methods and Processing of PLA/GNPs on the Micromorphology and Electrical Conductivity. In Proceedings of the American Society for Composites – 38th Technical Conference, ASC 2023 (pp. 382-391).
  4. Kinane, C., Tyler, K., Taub, A., & Pena-Francesch, A. (2023). Sustainable Materials Design in Undergraduate Engineering Education. In ASEE Annual Conference and Exposition, Conference Proceedings.
  5. Goettsch, J., Gladstein, A., Weiss, D., Shahani, A., Taub, A. (2023). Secondary Phase Refinement in Molten Aluminum via Low Power Electric Current Processing. In: Broek, S. (eds) Light Metals 2023. TMS 2023. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-031-22532-1_61
  6. Singhal, A., Langhorst, A; Banu, M., Taub, A., (2022). Effect of enzymatic retting conditions on the diameter and mechanical properties of flax fibers. Proceedings of the American Society for Composites-Thirty-Seventh Technical Conference. doi:10.12783/asc37/36478
  7. Langhorst, A., Harrison, E., Singhal, A., Banu, M., Taub, A., (2022). Reinforcement of Natural Fibers via Supercritical Fluid Infiltration of Nanoparticles. Proceedings of the American Society for Composites-Thirty-Seventh Technical Conference. doi: 10.12783/asc37/36411
  8. Singhal, A., Langhorst, A., Banu, M., Taub, A.I., “Optimization of Retting and Extraction through Constitutive Material Modelling of Plant Stems for Variability Reduction in Extracted Natural Fibers”, American Society for Composites 36th Technical Conference (ASC 2021), College Station, TX, September 19 – 21, 2021.
  9. Langhorst, A., Singhal, A., Mielewski, D., Banu, M., Taub, A.I. “Nanoparticle Modification of Natural Fibers for Structural Composites”, American Society for Composites 36th Technical Conference (ASC 2021), College Station, TX, September 19 – 21, 2021.
  10. Zhang, D., She, X., He, Y., Chapkin, Wesley A., Bregman, A., Wang, R., Taub, A. “Bridging of Carbon Fibers in CF/Epoxy Composites Using Electrostatically Induced CNT Alignment”, Proceedings of the American Society for Composites” Thirty-Sixth Technical Conference on Composite Materials. doi: 10.12783/asc36/35765
  11. Singhal, A., Langhorst, A., Banu, M., Taub, A.I. “Defect and Variability Reduction in Natural Fibers for Structural Composite Applications”, 5th International Conference on Natural Fibers (ICNF 2021), Madeira Island, Portugal, May 17-19, 2021.
  12. Langhorst, A., Singhal, A., Mielewski, D., Banu, M., Taub, A.I. “Supercritical Fluid-Assisted Nanomaterial Reinforcement of Flax Fibers”, 5th International Conference on Natural Fibers (ICNF 2021), Madeira Island, Portugal, May 17-19, 2021.
  13. Anurakparadorn, K., Taub, A.I., Michielssen, E. Dispersion of Cobalt Ferrite Functionalized Graphene Nanoplatelets in PLA for EMI Shielding Applications. In Proceedings of the American Society for Composites—Thirty-Sixth Technical Conference on Composite Materials. 2021. 10.12783/asc36/35905
  14. Shin, J., Bansal, A., Cheng, R., Taub, A., & Banu, M. (2021). A Cost-Effective Method for Bulge Prediction in Two Point Incremental Forming. Paper presented at ESAFORM 2021. 24th International Conference on Material Forming, Liège, Belgique. doi: 10.25518/esaform21.419
  15. Zhang, D., Xingkang, S., He, Y., Chapkin, W., Bregman, A., Wang, R., Taub, A. Bridging of Carbon Fibers in CF/Epoxy Composites Using Electrostatically Induced CNT Alignment. Proceedings of the American Society for Composites—Thirty-Sixth Technical Conference on Composite Materials. 2021.
  16. Esmaeilpour, R., Kim, H., Asgharzadeh, A., Nazari Tiji, S.A., Pourboghrat, F., Banu, M., Bansal, A., Taub, A.I. Experimental validation of the simulation of single-point incremental forming of AA7075 sheet with Yld2004-18P yield function calibrated with crystal plasticity model. Int J Adv Manuf Technol (2021). https://doi.org/10.1007/s00170-021-06706-2
  17. Bansal, A., Cheng, R., Banu, M., Taub, A., & Ni, J. “Experimental Analysis of Material Squeeze Factor in Two-Point Incremental Forming of AL 7075-O”. In International Manufacturing Science and Engineering Conference (Vol. 84263, p. V002T06A027). American Society of Mechanical Engineers. 2020.
  18. Randy Cheng, Cameron Cafmeyer, Ravi Verma, Alan Taub. Fatigue Life Comparison Between Hydroformed and Incrementally Formed (ISF) Parts. Manufacturing Science & Engineering 2020. Cincinnati, OH.
  19. Randy Cheng, Ankush Bansal, Xun Liu, Alan Taub (2019). Effect of ultrasonic-assisted two-point incremental sheet forming on surface finish. Materials Science & Technology 2019. Portland, OR.
  20. J. Shin, N. Moser, D. Leem, A. Bansal, K. Ehmann, J. Cao, A. Taub, and M. Banu, A Benchmark on Modeling of Incremental Forming of Aluminum 7075-O, 5th World Congress on Integrated Computational Materials Engineering – ICME 2019.
  21. J. Shin, A. Bansal, A. Taub, and M. Banu, Bi-directional Contour Tool Path Scheme to Eliminate Twist During Incremental Sheet Forming, The 13th International Conference on Numerical Methods in Industrial Forming Process – NUMIFORM 2019.
  22. J. Shin, A. Bansal, R. Cheng, A. Taub, and M. Banu, Process Planning for Precision Incremental Forming of Complex Part, 22nd International Conference on Material Forming – ESAFORM 2019.
  23. R. Cheng, N. Wiley, M. Short, X. Liu, and A. Taub, “Applying ultrasonic vibration during single-point and two-point incremental sheet forming,” Procedia Manuf., vol. 34, pp. 186–192, Jan. 2019.
  24. G. Daehn, E. Tekkaya, J. Cao, A. I. Taub, M. Banu, “A vision paper on metamorphic manufacturing – the third wave of digital manufacturing for improved competitiveness and national security”, Roadmap for LIFT Agile Manufacturing, Pages: 24, 08/2018.
  25. Nath, M., Shin, J., Bansal, A., Banu, M., Taub, A. “Comparison of Texture and Surface Finish Evolution During Single Point Incremental Forming and Formability Testing of AA 7075”. Light Metals 2018, The Minerals, Metals & Materials Series, 2018, pp 225-232.
  26. Shin, J., A. Bansal, M. Nath, R. Cheng, M. Banu and A. Taub. “Prediction of Negative Bulge in Two Point Incremental Forming (TPIF) of an Asymmetric Heart Shape Part,” NUMISHEET 2018, J. Phys. Conf. Ser., 2018.
  27. Nath, M., Shin, J., Bansal, A., Banu, M., Taub, A. “Comparison of Texture and Surface Finish Evolution During Single Point Incremental Forming and Formability Testing of AA 7075”. Light Metals 2018, The Minerals, Metals & Materials Series, 2018.
  28. Nath, M., Salem, E., Shin, J., Odykirk, T., Banu, M., Taub, A. “Microstructure and Surface Finish Evolution During Single Point Incremental Forming”. Contributed Papers from Materials Science & Technology 2017, 2017.
  29. He, Y., & Taub, A. I. (2017). Kinetics of carbon nanotube alignment under shear force via real-time polarized Raman spectroscopy. In Advanced Materials – TechConnect Briefs 2017 (Vol. 1, pp. 69–71). TechConnect.
  30. He, Y., Taub, A. I., “Temperature influence on the shear-induced alignment of carbon nanotubes in polymer composite via real-time polarized Raman spectroscopy”, 32nd ASC Technical Conference, 2017.
  31. Chapkin, Wesley A., Taub, Alan I., “Electrostatic Alignment Energy of Carbon Nanotubes”, 32nd ASC Technical Conference, 2017.
  32. Chapkin, Wesley A., Taub, Alan I., 2016. “Determining the controlling mechanism of electrostatically induced carbon nanotube rotation using in situ, real-time polarized Raman spectroscopy”, Proc Amer Soc Comp 31st Tech Conf: pp. 1–11.
  33.  “Intergranular Fracture in Rapidly Solidified Ll sub 2 Compounds”, Taub, A.I., Briant, C.L., High Temperature Aluminides & Intermetallics, 1990, 153-173.
  34. “Fracture Modes in L1 sub 2 Compounds”, Briant, C.L., Taub, A. I., High-Temperature Ordered Intermetallic Alloys. III, 1989, 281-286.
  35. “Ni3Al-Base Alloys Processed by Rapid Solidification”, Huang, S.C., Chang, K.M., Taub, A.I., Metal Powder Report, February 1988, 43(2), 92-95.
  36. “Grain Boundary Chemistry and Ductility in Nickel-Base L1 sub 2 Intermetallic Compounds”, Taub, A. I., Briant, C. L., High-Temperature Ordered Intermetallic Alloys. II, 1987, 343-353.    
  37. “High-Temperature Fatigue Crack Propagation in P/M Ni sub 3 Al—B Alloys”, Chang, K.M., Huang, S.C., Taub, A.I., High-Temperature Ordered Intermetallic Alloys. II, 1987, 303-308.   
  38. “Rapid Solidification of Boron-Doped Nickel Aluminides”, Taub, A.I., Chang, K.M., Huang, S. C., Competitive Advances in Metals and Processes–1st International SAMPE Metals and Metals Processing Conference, 1987, 1, 277-284.
  39. “Mechanical Properties of Rapidly Solidified Nickel-Base Superalloys and Intermetallics”, Taub, A.I., Jackson, M.R., Materials Research Society Symposia Proceedings, 1986, 58, 389-403.   
  40.  “Boron Effects in Rapidly Solidified Ni3al”, Huang, S.C., Taub, A.I., Chang, K.M., Briant, C.L., Hall, E.L., Rapidly Quenched Metals, Proceedings of the Fifth International Conference, 1985, 2, 1407-1410.  
  41. “Effects of Processing and Impurities on The Elevated Temperature Ductility Loss In Rapidly Solidified Ni3al-B”, Taub, A.I., Chang, K.M., Huang, S.C., Rapidly Solidified Materials, Proceedings of an International Conference (ASM), 1985, 297-302.
  42. “Boron Effects in Rapidly Solidified Ni3al”, Huang, S.C., Taub, A.I., Chang, K.M., Briant, C.L., Hall, E.L., Rapidly Quenched Metals, Proceedings of the Fifth International Conference, 1985, 2, 1407-1410.  
  43. “Effects of Processing and Impurities on The Elevated Temperature Ductility Loss In Rapidly Solidified Ni3al-B”, Taub, A.I., Chang, K.M., Huang, S.C., Rapidly Solidified Materials, Proceedings of an International Conference (ASM), 1985, 297-302.  
  44. “High Temperature Ductility Minimum in Rapidly Solidified Ni3al – B”, Taub, A.I., Huang, S.C., Chang, K.M., Materials Research Society Symposia Proceedings, 1985, 39, 221-228.
  45. “Measurement of The Flow of Amorphous Alloys Near Tg Using Continuous Heating”, Taub, A.I., Rapidly Quenched Metals, Proceedings of the Fifth International Conference, 1985, 2, 1365-1368.
  46. “Mechanical Properties and Potential Applications of Rapidly Solidified Alloys”, Taub, A.I., Rapidly Quenched Metals, Proceedings of the Fifth International Conference, 1985, 2, 1611-1618.  
  47. “Ni3Al-Base Alloys Processed by Rapid Solidification”, Huang, S.C., Chang, K.M. Taub, A.I., Rapidly Solidified Materials, Proceedings of an International Conference (ASM), 1985, 255-260.
  48. “Property Comparison of Melt-Spun Ribbons and Consolidated Powders of Ni3al-B”, Chang, K.M. Taub, A.I., Huang, S.C., Materials Research Society Symposia Proceedings, 1985, 39, 335-342.
  49. “Stoichiometry Effects on The Strengthening and Ductilization Of Ni3al By Boron Modification and Rapid Solidification”, Taub, A.I., Huang, S.C., Chang, K.M., Failure Mechanisms in High Performance Materials, Proceedings of the 39th Meeting of the Mechanical Failures Prevention Group, 1985, 57-65.
  50. “Low Temperature Crystallization Anomoly in Amorphous Ni-Zr,” Rao, K.V., Walter, J.L., Taub, A.I., Koskenmaki, D.C., Editions De Physique, 1985: 187-191.
  51. “Comparison of Rapidly Solidified Nickel Base Superalloys Prepared By Melt Spinning And Plasma Deposition”, Taub, A.I., Jackson, M.R., Huang, S.C., Hall, E.L., Rapidly Solidified Metastable Materials. Materials Research Society Symposia Proceedings, 1984, 28, 89-394.
  52. “Microstructure Investigation on Rapidly Solidified Ni3al Containing Boron”, Chang, K.M., Huang, S.C., Taub, A.I., Rapidly Solidified Metastable Materials. Materials Research Society Symposia Proceedings, 1984, 28, 401-405.
  53. “Creep, Stress Relaxation and Structural Change in an Amorphous Metal”, Taub A.I., Luborsky F.E., Proc. 4th Int. Conf. Rapidly Solidified Quenched Metals, 1981, 1341.

Refereed conference summaries

  1. “Reducing Weight for Transportation Applications: Technology Challenges and Opportunities”, Taub, A.I., TMS2015, March 2015 (extended abstract).

Abstracts for non-refereed conference proceedings

  1. “General Motors’ R&D Network: Managing Innovation Globally,” Vaz, Nuno A., Taub, Alan I., Facets (International Union of Materials Research Societies), April 2003, 2(2), 1-6.
  2. “Polymer composites for automotive applications”, Taub, A.I., Johnson, C.F., SAE China Conference Proceedings, 1995.
  3. “Comparison of Flow and Structural Relaxation in Amorphous Alloys with Physical Aging in Amorphous Polymers”, Taub, A.I., Proceeding Blacksburg Workshop on Relaxation Effects in Disorder Systems, 1983.   

Books

  1. “High-Temperature Ordered Intermetallic Alloys. III”, Liu, C.T., Taub, A.I., Stoloff, N.S., Koch, C.C., Materials Research Society Symposia Proceedings, 1988, 775 pages.
  2. “Rapidly Solidified Alloys and Their Mechanical and Magnetic”, Giessen, B.C., Polk, D.E., Taub, A.I., Materials Research Society Symposia Proceedings, 1986, 58. 

Book Chapters

  1. “Developing Banding Microstructures in Directional Solidification of Aluminum Metal Matrix Composites”, Perez Coronado, J., Aramanda, S. K., Goettsch, J., Shahani, A. J., Taub, A. Cham: Springer Nature Switzerland, pp. 268–72, doi:10.1007/978-3-031-50308-5_34.
  2. “Influence of the Identification Procedures of the Material Model in Accurate Prediction of Incremental Sheet Forming Forces”, Betaieb, E., Shin, J., Lee, Y., Duchêne, L., Taub, A. I., Banu, M., Habraken, A.M.  Cham: Springer Nature Switzerland, pp. 591–602, doi:10.1007/978-3-031-40920-2_61.
  3. “A Comparative Study of Incremental Sheet Forming Process to Achieve Optimal Accuracy”, Shin, J., Leem, D., Moser, N., Bansal, A., Cheng, R., Ehmann, K., Cao, J., Taub, A., Banu, M.  Cham: Springer International Publishing, pp. 141–54, doi:10.1007/978-3-031-06212-4_13.
  4. “The Effect of Ultrasonic Vibration on Material Movement in Incremental Sheet Forming”, Cheng, R., Bansal, A., Kang, J., Liu, X., Taub, A.  Cham: Springer International Publishing, pp. 383–94, doi:10.1007/978-3-030-75381-8_32.
  5. “Developments in Rapidly Solidified Nickel and Titanium Intermetallics”, Rowe, R.G., Taub, A.I., Froes, F.H., Advanced Materials and Processing Techniques for Structural Application, 1987, 415-427.  
  6. “Elevated Temperature Embrittlement of Rapidly Solidified Nickel-Base Alloys by Oxygen”, Taub, A.I., Chang, K.M., Processing of Structural Metals by Rapid Solidification, 1987, 437-444.
  7. “Amorphous Alloys: Flow and Fracture”, Spaepen, F., Taub A.I., Amorphous Metallic Alloys, Edited by Luborsky, F.E., 1983, 231.   

Government, university, or industrial reports

  1. “Investigation of Rapidly Solidified Ni3Al-Based Alloys”, Huang, S. C.; Chang, K. M.; Taub, A. I., GE Report: 84SRD034, May 1984, 38.
  2. “Ideal Elastic, Anelastic, And Viscoelastic Flow in A Metallic Glass”, Taub, A.I., Spaepen, F., Report: TR-15, Harvard Univ., Cambridge, MA. Div. of Applied Sciences, Jul 1982, 10 pages.   
  3. “Flow and relaxation of a metallic glass”, Taub, A.I., Dissertation: Thesis (Ph. D.) Harvard University, 1979.    

Publications in popular press/magazines

  1. “The shift to advanced materials: GM’s Alan Taub surveys future of the auto industry”, Taub, A.I., Interviewed by: Ginley, D.S., Robinson, A.L., MRS Bulletin, March 2012, 37(3): 196-203.
  2. “Automotive materials: Technology trends and challenges in the 21st century”, Taub, Alan I., MRS Bulletin, April 2006, 31(4), 336-343.
  3. “Materials researcher switches from brake rotor materials to crash dummies”, Taub, A.I., 2000 MRS Bulletin, June 2000, 25(6) 51-52.

US and International Patent Awards

  1. Liu, F., Dong, P., Liu, W., Taub, A.I. “Methods Of Joining Dissimilar Metals Without Detrimental Intermetallic Compounds” (US20210205919A1), Pending.
  2. Taub, Alan I., Frischmann, Peter G., Ballard, Donald E., “Hot shear cutting of amorphous alloy ribbon”, (US5005456), April 9, 1991.
  3. Frischmann, Peter G., Lee, Minyoung, Taub, Alan I., “Method and apparatus for parting a deck of amorphous alloy ribbons”, (US4995919), Feb 26, 1991.
  4. Taub, Alan I., Miller, Mark L., “Contraction pre-annealing superconducting wire for length stabilization followed by reaction annealing”, (US4983228), Jan 8, 1991.
  5. Minyoung, Lee, Taub, Alan I., Hibbs Jr., Louis E., “Apparatus for shear-cutting a stack of amorphous steel sheets” (US4942798), Jul 24, 1990.
  6. Taub, Alan I., Huang, Shyh-Chin, Chang, Keh-Min, “Method for Imparting Strength and Ductility To Intermetallic Phases”, (CA1266389), Mar 6, 1990.
  7. “Frischmann, Peter G., Taub, Alan I., “Isothermal hold method of hot working of amorphous alloys”, (US4715906), Dec 29, 1988
  8. Chang, Keh-Minn, Huang, Shyh-Chin, Taub, Alan I., “Ni3A1 alloy of improved ductility based on iron and niobium substituent”, (US4764226), Aug 16, 1988.
  9. Chang, Keh-Minn, Huang, Shyh-Chin, Taub, Alan I., “Ni3Al alloy of improved ductility based on iron substituent”, (US4743315), May 10, 1988.
  10. Chang, Keh-Minn, Huang, Shyh-Chin, Taub, Alan I., “Rapidly solidified zirconium modified nickel aluminide of improved strength”, (US4743316), May 10, 1988.
  11. Taub, Alan I., Huang, Shyh-Chin, Chang, Keh-Minn, “Carbon containing boron doped tri-nickel aluminide”, (US4725322), Feb 16, 1988.
  12. Taub, Alan I., Huang, Shyh-Chin, Chang, Keh-Minn, “Rapidly solidified tri-nickel aluminide base alloy”, (US4710247), Dec 1, 1987.
  13. Taub, Alan Irwin, Mizuno, Takao, Huang, Shyh Chin, “Cold worked tri-nickel aluminide alloy compositions”, (US4676829), Jun 30, 1987.
  14. Thomas, Edward Douglas, Taub, Alan Irwin, Frischmann, Peter George, “Heat assisted parting of amorphous alloys”, (US4670636), Jun 2, 1987.
  15. Taub, Alan I., Huang, Shih-Chin, Chang, Keh-Minn, “Rapidly solidified nickel aluminide alloy”, (US4668311), May 26, 1987.
  16. Huang, Shyh-Chin, Chang, Keh-Minn, Taub, Alan I., “Nickel aluminide base compositions consolidated from powder”, (US4661156), Apr 28, 1987.
  17. Chang, Keh-Minn, Huang, Shyh-Chin, Taub, Alan I., “Nickel aluminide compositions” (US4650519), Mar 17, 1987.
  18. Taub, Alan I., Huang, Shyh-Chin, Chang, Keh-Minn, “Rapidly solidified nickel aluminide of improved stoichiometry and ductilization and method”, (US4642139), Feb 10, 1987.
  19. Taub, Alan I., Huang, Shyh-Chin, Chang, Keh-Minn, “Tri-nickel aluminide compositions alloyed to overcome hot-short phenomena “, (US4613368), Sep 23, 1986.
  20. Taub, Alan Irwin, Huang, Shyh-Chin, Chang, Keh-Minn, “Tri-nickel aluminide compositions ductile at hot-short temperatures”, (US4609528), Sep 2, 1986.
  21. Chang, Keh-Minn, Huang, Shyh-Chin, Taub, Alan I., “Inhibition of grain growth in Ni3Al base alloys”, (US4606888), Aug 19, 1986.
  22. Taub, Alan Irwin, Frischmann, George, “Hot working of amorphous alloys”, (US4584036), Apr 22, 1986.
  23. Taub, Alan I., Frischmann, Peter G., Cline, Harvey E., “Stress assisted cutting of high temperature embrittled materials”, (US4562333), Dec 31, 1985.
  24. Taub, Alan I., Huang, Shyh-Chin, Chang, Keh-Minn, “Tri-nickel aluminide composition processing to increase strength”, (US4613480), Sep 23, 1986, (US19850783581), Oct 3, 1985.
  25. Taub, Alan, I., “Dynamic annealing method for optimizing the magnetic properties of amorphous metals”, (US4482402), Nov 13, 1984.
  26. Chang, Keh-Minn, Huang, Shyh-Chin, Taub, Alan I., “Method for imparting strength and ductility to intermetallic phases”, (US4478791), Oct 23, 1984.

Invited presentations – Since joining University of Michigan

  1. Invited Presentation, “Opportunities to Reduce the Weight of Structural Components for Transportation”, University of Tennessee, Knoxville, TN, November 12, 2019.
  2. Invited Presentation, “Challenges in Processing of Materials to Reduce Weight of Structural Components”, MRS Brazil, Balneario Camboriu, Brazil, September 26, 2019.
  3. Gladstein, A., Reese, C., Taub, A. I., “Comparison of In-Situ Aluminum Metal Matrix Composite Processes,” contributed talk, MS&T19, Portland, OR, Sept. 2019.
  4. Invited Presentation, “Opportunities to Reduce the Weight of Structural Components for Transportation”, NAMRC 47 / MSEC 2019, Erie, PA, June 12, 2019.
  5. Keynote Presentation, “Opportunities for New Materials and Processes in Lightweighting for the Transportation Sector”, SPE, Detroit, MI, March 18, 2019.
  6. Invited Presentation, “Role of Public-Private Initiatives in Scientific Research”, 2018 TMS March Meeting, San Antonio, TX, March 10, 2019.
  7. Invited Presentation, “Life Cycle Techno-Economic Analysis to Identify Commercially Viable CO2 Reduction Opportunities”, 9th Korea International CCUS Conference, Korea, February 22, 2019.
  8. Keynote Presentation, “Reducing Vehicle Weight: Technologies for 2030 and Beyond”, MainForum, Monterey, Mexico, October 30, 2018.
  9. Invited Presentation, “Lightweighting of automotive components with emerging composites and material forms”, MainForum, Monterey, Mexico, October 30, 2018.
  10. Invited Presentation, “Lightweight Innovations for Tomorrow (LIFT)”, 16th Global Conference on Sustainable Senior Manufacturing (GCSM), Lexington, KY, October 3, 2018
  11. Invited Presentation, “Lightweight Innovations for Tomorrow (LIFT)”, GALM, Detroit, MI, August 21, 2018.
  12. Invited Presentation, “Integrating User-Centric Design in Multi-Disciplinary Experiential Learning”, Materials Education Symposium (NAMES), University of Michigan, August 16-17, 2018.
  13. Invited Presentation, “Lightweight Innovations for Tomorrow (LIFT)”, Oak Ridge National Laboratory, Tennessee, June 13, 2018.
  14. Invited Presentation, “The Road to Sustainable Personal Mobility: A New DNA for the Automobile”, World Materials Summit, Strasbourg, France, November 20, 2017.
  15. Invited Presentation, “Lightweight Materials for Transportation”, Tenneco, Grass Lakes, MI, November 13, 2017.         
  16. Invited Presentation, “Forming and Joining Challenges for Light Weight Materials for Transportation”, MForeSight Forum, Detroit, October 19, 2017.
  17. Keynote Presentation, “Challenges and Opportunities to Reduce Weight in Transportation Applications”, Global Automotive Lightweight Materials, Detroit, August 22, 2017.
  18. Keynote Presentation, “Opportunities and Challenges for Implementing Powder Metallurgy Processes to Reduce Weight in Transportation Applications”, MPIF Powdermet, Las Vegas, NV, June 16, 2017.
  19. Golick Award Lecture, “Challenges to Reduce Weight in Transportation Applications”, Missouri University of Science & Technology, April 20, 2017.
  20. Invited Lecture, “Aligning Carbon Nanotubes in Polymer Matrices by Applying Electrical, Magnetic and Shear Forces”, Missouri University of Science & Technology, April 21, 2017.
  21. Keynote Presentation, “Opportunities and Challenges for Implementing Magnesium to Reduce Weight in Transportation Applications”, Magnesium Workshop, John Hopkins University, April 4, 2017.
  22. Invited Presentation, “Challenges to Reduce Weight in Transportation Applications”, Materials Research Society Symposium X, December 5, 2016.
  23. Invited Presentation, “Manufacturing Challenges to Reduce Weight in Transportation Applications”, ITPS America, August 12, 2016.
  24. Keynote Presentation, “Opportunities for Advanced Materials Manufacturing to Reduce Weight in Transportation Applications”, SIMTECH, July 13, 2016.
  25. Invited Panel Presentation, “Integrating the Supply Chain to Deliver the Reinvention of Personal Mobility”, MainForum Automotive Frontiers, March 11, 2016.
  26. Keynote Presentation, “Reducing Vehicle Weight: Technology Challenges and Opportunities”, MainForum Automotive Frontiers, March 9, 2016.
  27. Webcast, Design Engineering, “Optimization Tools”, January 14, 2016.
  28. Invited Presentation, “Lightweight Innovations for Tomorrow (LIFT) Manufacturing Institute Technical Vision”, Defense Manufacturing Conference, Phoenix, AZ, December 1, 2015.
  29. Invited Presentation, “Manufacturing Challenges to Reduce Weight in Transportation Applications”, TMS Manufacturing Summit, Chicago, IL, November 16, 2015.
  30. Plenary Speaker, “Manufacturing Challenges to Reduce Weight in Transportation Applications”, ASM Heat Treat Conference, Detroit, MI, October 21, 2015.
  31. Keynote Speaker, “Reducing Vehicle Weight: Technology Challenges and Opportunities”, Taub, Alan I., CHEMS Research Forum 2015, Lansing, MI, May 14, 2015.
  32. Speaker, “The New Automotive DNA: Driving GM to Adjacent Businesses”, Taub, Alan I., NIKE Innovation Meeting, Detroit, MI, May 13, 2015.
  33. Panel Speaker, “Introducing LIFT – Lightweight Innovations for Tomorrow”, Taub, Alan I., Michigan Minority Procurement Conference, Detroit, MI, May 6, 2015.
  34. Luncheon Speaker, “The Role of the National Network of Manufacturing Institutes in Improving U.S. Manufacturing Competitiveness”, Taub, Alan I., TMS LMD Luncheon, Orlando, FL, March 18, 2015.
  35. Keynote Speaker, “Reducing Weight for Transportation Applications: Technology Challenges and Opportunities”, Taub, Alan I., TMS, Orlando, FL, March 16, 2015.
  36. Invited Speaker, “Integration of Advanced Manufacturing with Component Design: Application to Structures for Transportation”, Taub, Alan I., CIRP, Haifa, Israel, March 3, 2015.
  37. Presentation and Panel Discussion, “National Institute Overview: Lightweight and Modern Metals Manufacturing Innovation (LM3I), Taub, A.I., San Antonio, TX, December 2, 2014.
  38. Presentation and Panel Discussion, “Advanced Manufacturing and the Role of Academia”, American Society of Mechanical Engineers (ASME) International Mechanical Engineering Congress and Exposition, Taub, A.I., Montreal, Canada, November 11, 2014.
  39. Keynote Speaker and Session Moderator, “Material Challenges for a Sustainable Automotive Industry”, Society of Automotive Engineers (SAE) 2014 Energy Savings and Emission Conference, Taub, A.I., Shanghai, China, November 5-6, 2014.
  40. Keynote Address, “Challenges in Assembly of Multi-Material Vehicles”, Sheet Metal Welding Conference (SMWC), Taub, A.I., Livonia, MI, October 22, 2014.
  41. Plenary Presentation and Panel Discussion Group, “Advanced Manufacturing of Lightweight Materials for Transportation Applications: Technology Challenges and Opportunities”, Materials Science and Technology 2014, Taub, A.I., Pittsburgh, PA, October 13, 2014.
  42. Panel Discussion Group, “How can the National Networks for Manufacturing Innovation (NNMI) Help Promote Sustainable Manufacturing”, 4th International Forum on Sustainable Manufacturing, Taub, A.I., Lexington, KY, September 12, 2014.
  43. Seminar Speaker, “Reducing Vehicle Weight: Technology Challenges and Opportunities”, University of Kentucky, Taub, A.I., Lexington, KY, September 11. 2014.
  44. Plenary Session, “The Opportunities and Challenges for Smart Materials in Developing Sustainable Personal Mobility”, Institute of Smart Structures and Systems (ISSS) International Conference, Taub, A.I., Bangalore, India, July 10, 2014.
  45. Plenary Keynote, “Addressing the Transportation Energy Challenge”, DOE Annual Merit Review, Taub, A.I., Washington D.C., June 16, 2014.
  46. Panel Discussion Group, “Leaders of Manufacturing Innovation”, Big M Conference (MSEC-NAMRC-ICMP), Taub, A.I., Detroit, MI, June 12, 2014.
  47. Keynote Speaker, “Reducing Vehicle Weight: Technology Challenges and Opportunities”, Taub, A.I., Lightweighting Summit: New Solutions, New Suppliers, Detroit, MI, May 20, 2014
  48. Lead Speaker, Ohio State University Materials Week, Taub, A.I., Ohio State University, Columbus, Ohio, May 9, 2014.
  49. Speaker, “The Role of Polymer Composites in Future Lightweight Material Structures for Transportation” SPE Automotive Engineering Plastics Conference, Taub A.I., April 30, 2014.
  50. Keynote Speaker, “Challenges / Opportunities for Lightweight Materials in Transportation”, Aluminum Association Annual Meeting, Taub, A.I., San Antonio, TX, April 1, 2014.
  51. Keynote Speaker, “Materials Challenges for A Sustainable Automotive Industry”, APS GERA, Taub, A.I., Denver, CO, March 2, 2014.
  52. Keynote Speaker, “Breakthroughs Needed for Lightweight Materials in Transportation”, WPI, Taub, A.I., Worcester, MA, December 11, 2013.
  53. Panel Member, Bloomberg Fuel Summit, Taub, A.I., Tel Aviv, IS, November 13, 2013.
  54. Keynote Speaker, “My Car, My Way”, IEEE, Taub, A.I., Santa Clara, CA, October 23, 2013.
  55. Invited Lecture, “Materials Challenges for A Sustainable Automobile Industry”, RPI, Taub, A.I., Albany, NY, October 16, 2013.
  56. Keynote Speaker, “Interaction with NIST Leadership and Government Officials”, MEP Advisory Board Meeting, Taub, A.I., Denver, CO, June 24, 2013.
  57. Speaker, “Advanced Materials and Processing: Enabling Improved Fuel Economy”, Ricardo Forum “Getting to 2025”, Taub, A.I., April 18, 2013.
  58. Speaker, “Role of Lightweight Materials to Improve Fuel Economy” ALCOA Sheet Metal Division, Taub, A.I., March 14, 2013.
  59. Speaker, “Lightweight Materials for the Automotive Industry – Materials Research Applied to National Energy Agenda”, TMS Morris Fine Symposium, Taub, A.I., March 4, 2013.
  60. Speaker, “Perspective on the Automotive Industry Over the Next Decade”, 3M, Taub, A.I., November 16, 2012.
  61. Speaker, “The New Automotive DNA: Driving to a Sustainable Future”, York University Chancellor Lecture, Taub, A.I., November 5, 2012.
  62. Speaker, “The Reinvention of the Automobile for 21st Century Sustainability”, NAE Frontiers of Engineering Forum, Taub, A.I., September 13, 2012.
  63. Speaker, “Lightweight Automotive Materials”, MRS Impact of Materials on Society WebCast, Taub, A.I., September 6, 2012.

Invited Presentations – General Motors

  1. Speaker, “Materials Challenges for a Sustainable Automobile Industry” Cambridge University Kelly Lecture, Taub, A.I., June 27, 2012.
  2. Speaker, “Materials Challenges for 21st Century Personal Mobility”, ACS Central Region Meeting, Taub, A.I., June 7, 2012.
  3. Speaker, “Materials Genome Initiative: Opportunities for the Auto Industry”, White House Materials Genome Kickoff Event, Taub, A.I., May 14, 2012.
  4. Speaker, “Advanced Automotive Materials: The New DNA of Personal Mobility”, SPE AutoEPCON, Taub, A.I., May 6, 2012.
  5. Keynote Presentation, “Addressing the Challenge of Sustainable Mobility- Vehicle Electrification”, MRS Acta Materiala Forum, November 27, 2011.
  6. Invited Presentation, “Delivering Sustainable Personal Mobility in the 21st Century”, GE Whitney Symposium, October 25, 2011.
  7. Keynote Presentation, “The Coming Personal Mobility Revolution”, ITS World Congress, October 16, 2011.
  8. Keynote Presentation, “Engaging New Partners to Reinvent Personal Mobility, HTIA Israel, June 2, 2011.
  9. Invited Presentation, “Advanced Engine Trends, Challenges and Opportunities”, DEER Conference, October 3, 2011.
  10. Invited Presentation, “Role of Science and Technology in the Automotive Industry”, Tsinghua University, April 23, 2011.
  11. Keynote Presentation, “Petroleum Alternatives”, SAE, April 13, 2011.
  12. Invited Presentation, “Role of Science and Technology in the Auto Industry”, APS Meeting, March 17, 2011.
  13. Keynote Presentation, “Global Innovation in the New General Motors”, India Decision Science Symposium, November 13, 2010.
  14. Keynote Presentation, “Global Innovation in the New General Motors”, Phacilitate Conference, November 10, 2010.
  15. Invited Presentation, “Smart Materials in the Automotive Industry”, ASME, September 29, 2010.
  16. Invited Presentation, “Reinventing the Automobile”, CO Bank Executive Forum, August 25, 2010.
  17. Invited Presentation, “Developing Tomorrow’s STEM Leaders – An Auto Industry Perspective”, Synergy Summit, August 17, 2010.
  18. Invited Presentation, “The Reinvention of the Automobile: Driving to a Sustainable Future”, United Nations CSD-18, May 4, 2010.
  19. Invited Presentation, “Advanced Automotive Materials”, Barrett Lecture, ASM Rocky Mountain Chapter, April 1, 2010.
  20. Invited Presentation, “Advanced Automotive Materials”, American Foundry Society, January 21, 2010.
  21. Invited Presentation, “Designing a New Automotive DNA”, ASME, November 17, 2009.
  22. Invited Presentation, “The New General Motors”, IRI CTO Forum, September 8, 2009.
  23. Invited Presentation, “Driving to a Sustainable Future: A New DNA for the Automobile”, ICOSSE Conference, July 31, 2009.
  24. Invited Presentation, “Materials Challenges for a Sustainable Automotive Industry”, AIME, July 22, 2009.
  25. Keynote Presentation, “Reinventing the New General Motors”, Israel Annual Venture Capital Conference, June 11, 2009.
  26. Keynote Presentation, “The Opportunity in Electric Transportation”, RTEC, May 27, 2009.
  27. Invited Presentation, “Materials for a Sustainable Automotive Future”, ASM-SAE Detroit Meeting, May 11, 2009.
  28. Invited Presentation, “GM R&D and Advanced Technology Overview”, Ohio State University, November 5, 2008.
  29. Invited Presentation, “Driving Change in the Auto Industry”, ICFDM Conference, September 25, 2008.
  30. Invited Presentation, “Developing Technology for Sustainable Business: In China, By China, For China”, CEB Shanghai Meeting, April 15, 2008.
  31. Keynote Presentation, “Reinventing the Automobile: The Cyber Physical Challenge”, Cyber Physical Symposium, April 3, 2008.
  32. Invited Presentation, “Driving the Future: Materials Challenges for a Sustainable Automotive Industry”, University of Texas, Short Lecture, March 28, 2008.
  33. Invited Presentation, “Overview of GM R&D”, Kettering University, March 11, 2008.
  34. Keynote Presentation, “Driving to a Sustainable Future: Reinventing the Automobile”, SAE Connected Vehicle Conference, October 31, 2007.
  35. Invited Presentation, “Driving the Future: Materials Challenges for a Sustainable Automotive Industry”, Wulff Lecture, October 17, 2007.
  36. Invited Presentation, “Driving the Future: Materials Challenges for a Sustainable Automotive Industry”, TMS, September 17, 2007.
  37. Invited Presentation, “New Materials: The Real Enablers for the Reinvention of the Automobile”, McMasters University, June 21, 2007.
  38. Invited Presentation, “General Motors R&D Overview”, CPPCC Shanghai, May 3, 2007.
  39. Keynote Presentation, “Driving Change in the Auto Industry: Technology Trends and Challenges in the 21st Century”, NIST Conference, April 12, 2007.
  40. Invited Presentation, “Tartan Racing Team Whistle Stop”, DARPA, April 3, 2007.
  41. Keynote Presentation, “Drivers of Change: 50 Years of Automotive Materials and Manufacturing Advances”, TMS Golden Jubilee Celebration, February 28, 2007.
  42. Keynote Presentation, “Fueling the Future: The Pathway to Renewable Energy”, University of Michigan Energy Forum, October 27, 2006.
  43. Invited Presentation, “New Materials – The Real Enablers for the Reinvention of the Automobile”, MIT, October 11, 2006.
  44. Keynote Presentation, “Alternative Powertrains”, NAE Regional Meeting, April 17, 2006.
  45. Keynote Presentation, “Managing Innovation Globally”, APS Meeting, March 16, 2006.
  46. Invited Presentation, “Automotive Materials Technology”, Johns Hopkins Wenk Lecture, April 6, 2006.
  47. Keynote Presentation, “Automotive Materials, Technology Trends and Challenges in the 21st Century”, MRS Fall Meeting, November 28, 2005.
  48. Invited Presentation, “Automotive Materials- Technology Trends and Challenges”, Northwestern University, October 19, 2005.
  49. Keynote Presentation, “General Motors Research and Development Overview”, SAE Teetor Awards, April 11, 2005.
  50. Keynote Presentation, “Advanced Propulsion Systems”, GE Whitney Symposium, March 29, 2005.
  51. Keynote Presentation, “Automotive Research Trends”, TMS Meeting, February 14, 2005.
  52. Keynote Presentation, “Globalization of R&D”, IRI Meeting, October 11, 2004.
  53. Keynote Presentation, “Automotive Materials: Technology Trends”, SPE-TPO Conference, October 4, 2004.
  54. Invited Presentation, “General Motors- Research and Development Overview”, China NSF, September 20, 2004.
  55. Invited Presentation, “General Motors Research and Development Overview”, Shanghai Jiao Tung University, March 26, 2004.
  56. Invited Presentation, “Automotive Research: Technical Trends”, Carnegie Mellon University, February 6, 2004.
  57. Keynote Presentation, “Automotive Materials Challenges”, ICIM China, March 19, 2003.
  58. Keynote Presentation, “Technical Challenges for Automotive Materials, SAE, March 3, 2003
  59. Invited Presentation, “Automotive Industry Aluminum Usage- Trends and Challenges”, Aluminum Association Meeting, October 23, 2002
  60. Invited Presentation, “Technical Challenges Facing the Automotive Industry”, NIST, September 12, 2002.
  61. Keynote Presentation, “Automotive Propulsion – Technical Trends and Challenges”, Traverse City CAR Management Briefing”, August 5, 2002.
  62. Invited Presentation, “Automotive Materials – Technical Trends and Challenges”, The National Academies 2002 Forum on Materials and Society, March 27, 2002
  63. Invited Presentation, “The Technical Challenges and the Role of Universities for GM”, University of Pennsylvania, March 6, 2002.

Graduate Student Presentations

  1. Gladstein, A., Goettsch, J., Reese, C., Xiao, X., Shahani, A., Taub, A., “Synchrotron-based X-ray Nanotomography of In-Situ Al/TiC Metal Matrix Nanocomposite,” poster, Michigan Materials Research Institute Symposium, Ann Arbor, MI, Nov. 2021.
  2. Randy Cheng, Fatigue Life Comparison Between Hydroformed and Incrementally Formed (ISF) Parts. Manufacturing Science & Engineering 2020. Cincinnati, OH.
  3. Gladstein, A., Taub, A. I., “Aluminum Nanocomposites made via In Situ Metal-based pyrolysis: Processing and Microstructure,” poster, TMS2020, San Diego, CA, Feb. 2020.
  4. Gladstein, A., Taub, A. I., “Al-Based In-Situ Nanocomposites Via Metal-Based Pyrolysis: Processing and Microstructure, poster, Materials Research Symposium, Ann Arbor, MI, Nov. 2019.
  5. Gladstein, A., Reese, C., Taub, A. I., “Comparison of In-Situ Aluminum Metal Matrix Composite Processes,” contributed talk, MS&T19, Portland, OR, Sept. 2019.
  6. Randy Cheng, Effect of ultrasonic-assisted two-point incremental sheet forming on surface finish. Materials Science & Technology 2019. Portland, OR.
  7. J. Shin, A Benchmark on Modeling of Incremental Forming of Aluminum 7075-O, 5th World Congress on Integrated Computational Materials Engineering – ICME 2019
  8. J. Shin, Bi-directional Contour Tool Path Scheme to Eliminate Twist During Incremental Sheet Forming, The 13th International Conference on Numerical Methods in Industrial Forming Process – NUMIFORM 2019
  9. J. Shin, A. Bansal, R. Cheng, A. Taub, and M. Banu, Process Planning for Precision Incremental Forming of Complex Part, 22nd International Conference on Material Forming – ESAFORM 2019
  10. Nath, M., A. Bansal, J. Shin, R. Cheng, M. Banu and A. Taub (2019 March). Microstructure and Surface Finish Evolution During Incremental Sheet Forming of AA 7075. Poster presented at TMS 2019, San Antonio, TX.
  11. Cheng, R., Wiley, N., Short, M., Liu, X., Taub, A. I., “Applying ultrasonic vibration during single-point and two-point incremental sheet forming,” Procedia Manuf., vol. 34, pp. 186–192, Jan. 2019.
  12. Nath, M., A. Bansal, J. Shin, M. Banu and A. Taub (2018 May). Microstructure Evolution During Incremental Sheet Forming. Poster presented at EBSD 2018, Ann Arbor, MI.
  13. Nath, M., J. Shin, A. Bansal, R. Cheng, M. Banu and A. Taub (2018). “Effects of Squeeze Factor on the Microstructure and Surface Finish of Incrementally Formed Parts,” Solid State Processing, Materials Science & Technology 2018, Columbus, OH
  14. Bregman, Avi, Michielssen, Eric, Taub, Alan I., Printed Magnetically Functionalized Graphene Polymer Composites for EMI Shielding” MRS Spring Meeting, 2018.
  15. Nath, M., Shin, J., Bansal, A., Banu, M., Taub, A. “Comparison of Texture and Surface Finish Evolution During Single Point Incremental Forming and Formability Testing of AA 7075”. Light Metals 2018, The Minerals, Metals & Materials Series, 2018.
  16. He, Y., & Taub, A. I. (2017). Kinetics of carbon nanotube alignment under shear force via real-time polarized Raman spectroscopy. Symposium presentation at Advanced Materials – TechConnect Briefs, May 2017.
  17. Nath, M., Salem, E., Shin, J., Odykirk, T., Banu, M., Taub, A. “Microstructure and Surface Finish Evolution During Single Point Incremental Forming”. Materials Science & Technology, 2017.
  18. Langhorst, A., Kiziltas, A., Mielewski, D., “Blue Agave Reinforced Polypropylene Composites for Automotive Applications”, SPE Automotive TPO Engineered Polyolefins Global Conference, 2017.
  19. Chapkin, W.A., Taub, A.I. “The effect of length on the orientation randomization of aligned carbon nanotubes in a polymer”. American Society for Composites, 32nd Technical Meeting, Purdue University. 2017.
  20. Chapkin, W.A., Taub, A.I. “Determining the controlling mechanism of electrostatically induced carbon nanotube rotation using in situ, real-time polarized Raman spectroscopy”.  American Society for Composites, 31st Technical Meeting, Williamsburg, VA. 2016
  21. “Investigation of Thickness Variation in Single Point Incremental Forming”, Salem, Erika, Shin, Jaekwang, Nath, Maya, Banu, Mihaela Banu, Taub, Alan I., NAMRC conference, July 2016.